Confirmation Driving Pattern

Connect the Techstream to the DLC3.
Turn the engine switch on (IG) and turn the Techstream on.
Clear the DTCs.
Refer to DTC CHECK / CLEAR [12/2017 - 10/2023]
Turn the engine switch off and wait for at least 30 seconds.
Turn the engine switch on (IG) and Techstream on.
Start the engine and run it at idle for at least 5 minutes.
Enter the following menus: Body Electrical / Sub Battery Module / Trouble Codes.
Check the DTC.
Refer to DTC CHECK / CLEAR [12/2017 - 10/2023]

HINT:

If a DTC is output, the system is malfunctioning.