| U0100-87 |
Lost Communication With ECM/PCM "A" Missing Message |
Communication stop occurs between the combination meter assembly and ECM continuously for approximately 4 seconds or more. |
- ECM
- CAN communication system
- Combination meter assembly
|
DTC stored |
- |
| U0103-87 |
Lost Communication with Gear Shift Control Module "A" Missing Message |
Communication stop occurs between the combination meter assembly and shift control ECU continuously for 5 seconds or more. |
- Shift control ECU
- CAN communication system
- Combination meter assembly
|
DTC stored |
- |
| U0126-87 |
Lost Communication with Steering Angle Sensor Module Missing Message |
Communication stop occurs between the combination meter assembly and steering sensor continuously for approximately 4 seconds or more. |
- Steering sensor
- CAN communication system
- Combination meter assembly
|
DTC stored |
- |
| U0127-87 |
Lost Communication with Tire Pressure Monitor Module Missing Message |
Communication stop occurs between the combination meter assembly and tire pressure warning ECU and receiver continuously for 5 seconds or more. |
- Tire pressure warning ECU and receiver
- CAN communication system
- Combination meter assembly
|
DTC stored |
- |
| U0129-87 |
Lost Communication With Brake System Control Module Missing Message |
Either of the following conditions is met:
- Communication stop occurs between the combination meter assembly and skid control ECU continuously for 1 second or more.
- Communication stop occurs between the combination meter assembly and skid control ECU continuously for approximately 4 seconds or more.
|
- Skid control ECU
- CAN communication system
- Combination meter assembly
|
DTC stored |
- |
| U0130-87 |
Lost Communication with Steering Effort Control Module Missing Message |
Communication stop occurs between the combination meter assembly and front steering control ECU continuously for approximately 4 seconds or more. |
- Front steering control ECU
- CAN communication system
- Combination meter assembly
|
DTC stored |
- |
| U0131-87 |
Lost Communication With Power Steering Control Module Missing Message |
Communication stop occurs between the combination meter assembly and rack and pinion power steering gear assembly continuously for approximately 4 seconds or more. |
- Rack and pinion power steering gear assembly
- CAN communication system
- Combination meter assembly
|
DTC stored |
- |
| U0132-87 |
Lost Communication with Suspension Control Module "A" Missing Message |
Communication stop occurs between the combination meter assembly and absorber control ECU continuously for 10 seconds or more. |
- Absorber control ECU
- CAN communication system
- Combination meter assembly
|
DTC stored |
- |
| U0134-87 |
Lost Communication with Power Steering Control Module Rear Missing Message |
Communication stop occurs between the combination meter assembly and rear steering control ECU continuously for approximately 4 seconds or more. |
- Rrear steering control ECU
- CAN communication system
- Combination meter assembly
|
DTC stored |
- |
| U0142-87 |
Lost Communication with Body Control Module "B" |
Communication stop occurs between the combination meter assembly and main body ECU (multiplex network body ECU) continuously for 5 seconds or more. |
- Main body ECU (multiplex network body ECU)
- CAN communication system
- Combination meter assembly
|
DTC stored |
- |
| U0151-87 |
Lost Communication with Restraints Control Module Missing Message |
Communication stop occurs between the combination meter assembly and airbag ECU assembly continuously for 5 seconds or more. |
- Airbag ECU assembly
- CAN communication system
- Combination meter assembly
|
DTC stored |
- |
| U0163-87 |
Lost Communication with Navigation Control Module |
Communication stop occurs between the combination meter assembly and radio receiver assembly continuously for 5 seconds or more. |
- Radio receiver assembly
- CAN communication system
- Combination meter assembly
|
DTC stored |
- |
| U0164-87 |
Lost Communication with HVAC Control Module Missing Message |
Communication stop occurs between the combination meter assembly and air conditioning amplifier assembly continuously for 5 seconds or more. |
- Air conditioning amplifier assembly
- CAN communication system
- Combination meter assembly
|
DTC stored |
- |
| U0182-87 |
Lost Communication with Lighting Control Module Front Missing Message |
Communication stop occurs between the combination meter assembly and headlight ECU sub-assembly LH continuously for 5 seconds or more. |
- Headlight ECU sub-assembly LH
- CAN communication system
- Combination meter assembly
|
DTC stored |
- |
| U0230-87 |
Lost Communication with Rear Gate Module Missing Message |
- Communication stop occurs between the combination meter assembly and luggage closer motor assembly continuously for 5 seconds or more.(w/ Power Trunk Lid System)
- Communication stop occurs between the combination meter assembly and multiplex network door ECU continuously for 5 seconds or more.(w/o Power Trunk Lid System)
|
- Luggage closer motor assembly
- CAN communication system
- Combination meter assembly
|
DTC stored |
- |
| U0233-87 |
Lost Communication with Side Obstacle Detection Control Module "B" Missing Message |
Communication stop occurs between the combination meter assembly and blind spot monitor sensor RH (B) continuously for 5 seconds or more. |
- Blind spot monitor sensor RH (B)
- CAN communication system
- Combination meter assembly
|
DTC stored |
- |
| U023A-87 |
Lost Communication with Image Processing Module "A" |
- Communication stop occurs between the combination meter assembly and forward recognition camera continuously for 5 seconds or more.
(for Mono Camera Type)
- Communication stop occurs between the combination meter assembly and object recognition camera continuously for 5 seconds or more.
(for Stereo Camera Type)
|
- Forward recognition camera
(for Mono Camera Type)
- Object recognition camera
(for Stereo Camera Type)
- CAN communication system
- Combination meter assembly
|
DTC stored |
- |
| U0327-87 |
Software Incompatibility with Vehicle Security Control Module Missing Message |
Communication stop occurs between the combination meter assembly and certification ECU (smart key ECU assembly) continuously for 5 seconds or more. |
- Certification ECU (smart key ECU assembly)
- CAN communication system
- Combination meter assembly
|
DTC stored |
- |
| U1104-87 |
Lost Communication with Driving Support ECU Missing Message |
Either of the following conditions is met:
- Communication stop occurs between the combination meter assembly and driving support ECU assembly continuously for 5 seconds or more.
- Communication stop occurs between the combination meter assembly and forward recognition camera continuously for 5 seconds or more.
|
- Driving support ECU assembly
- CAN communication system
- Combination meter assembly
|
DTC stored |
- |
| U1110-87 |
Lost Communication with Intuitive Parking Assist Module Missing Message |
Communication stop occurs between the combination meter assembly and clearance warning ECU assembly continuously for 5 seconds or more. |
- Clearance warning ECU assembly
- CAN communication system
- Combination meter assembly
|
DTC stored |
- |
| U1112-87 |
Lost Communication with Combination Switch Module Missing Message |
Communication stop occurs between the combination meter assembly and steering sensor continuously for 10 seconds or more. |
- Steering sensor
- CAN communication system
- Combination meter assembly
|
DTC stored |
- |
| U1133-87 |
Lost Communication with PMN Module Missing Message |
Communication stop occurs between the combination meter assembly and certification ECU (smart key ECU assembly) continuously for approximately 4 seconds or more. |
- Certification ECU (Smart key ECU assembly)
- CAN communication system
- Combination meter assembly
|
DTC stored |
- |