LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2019 >> LS 500 Base, AWD >> Repair and Diagnosis (Single Page) >> Restraints >> Restraints Control Systems >> Easy Access Buckle System - Diagnostic Codes & Symptom Tests >> Easy Access Buckle System >> Driver Seat Easy Access Buckle Function does not Operate [12/2017 - 10/2023] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Driver Seat Easy Access Buckle Function does not Operate [12/2017 - 10/2023]: Procedure

  1. CHECK FRONT POWER SEAT CONTROL SYSTEM 
    1. Operate the power seat switch and check that the head rest and pneumatic support function operate normally.

      Refer to OPERATION CHECK [12/2017 - 09/2019] , or refer to OPERATION CHECK [09/2019 - 10/2020] , or refer to OPERATION CHECK [10/2020 - 10/2022] , or refer to OPERATION CHECK [10/2022 - 10/2023]

      OK

      The head rest and pneumatic support function operate normally.

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    GO TO FRONT POWER SEAT CONTROL SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [12/2017 - 10/2023] 

    Result: 

    OK 

    See step  2

  2. READ VALUE USING TECHSTREAM (FL DOOR COURTESY SW) 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Main Body / Data List.
    5. Read the Data List according to the display on the Techstream.

      Body Electrical > Main Body > Data List 

      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      FL Door Courtesy SW Front door courtesy light switch LH signal OFF or ON OFF: Front door LH closed
      ON: Front door LH open
      -

      Body Electrical > Main Body > Data List 

      Tester Display
      FL Door Courtesy SW

      OK

      On the Techstream screen, ON or OFF is displayed for each item according to the table above.

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    GO TO LIGHTING SYSTEM. Refer to  Door Courtesy Switch Circuit [12/2017 - 10/2023] 

    Result: 

    OK 

    See step  3

  3. INSPECT FRONT SEAT INNER BELT ASSEMBLY LH (BUCKLE MOTOR, BUCKLE SWITCH) 
    1. Remove the front seat inner belt assembly LH (buckle motor, buckle switch).

      Refer to REMOVAL [12/2017 - 09/2018] , or refer to REMOVAL [09/2018 - 10/2020] , or refer to REMOVAL [10/2020 - 10/2022] , or refer to REMOVAL [10/2022 - 10/2023]

    2. Inspect the front seat inner belt assembly LH (buckle motor, buckle switch).

      Refer to INSPECTION [12/2017 - ]

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    REPLACE POSITION CONTROL ECU ASSEMBLY. Refer to  REMOVAL [12/2017 - 09/2018]  , or refer to  REMOVAL [09/2018 - 10/2020]  , or refer to  REMOVAL [10/2020 - 10/2022]  , or refer to  REMOVAL [10/2022 - 10/2023] 

    Result: 

    NG 

    REPLACE FRONT SEAT INNER BELT ASSEMBLY LH. Refer to  REMOVAL [12/2017 - 09/2018]  , or refer to  REMOVAL [09/2018 - 10/2020]  , or refer to  REMOVAL [10/2020 - 10/2022]  , or refer to  REMOVAL [10/2022 - 10/2023]