| U0100-87 |
Lost Communication with ECM/PCM "A" Missing Message |
While driving at 20km/h (12.4 mph) or higher, a communication malfunction with the ECM continues for 5 minutes or more |
- ECM
- CAN communication system
- Rack and pinion power steering gear assembly
|
EPS warning light: Does not come on |
| U0126-87 |
Lost Communication with Steering Angle Sensor Module Missing Message |
After the ignition switch is turned to ON, a communication malfunction with the steering sensor continues for 1.3 seconds or more |
- Steering sensor
- CAN communication system
- Rack and pinion power steering gear assembly
|
EPS warning light: Does not come on |
| U0129-87 |
Lost Communication With Brake System Control Module Missing Message |
After the ignition switch is turned to ON, a communication malfunction with the skid control ECU (brake actuator assembly) continues for 10 seconds or more |
- Skid control ECU (brake actuator assembly)
- CAN communication system
- Rack and pinion power steering gear assembly
|
EPS warning light: Comes on |
| U0132-87 |
Lost Communication with Suspension Control Module "A" Missing Message |
Lost communication with AVS ECU (absorber control ECU) |
- AVS ECU (Absorber control ECU)
- CAN communication system
- Rack and pinion power steering gear assembly
|
EPS warning light: Does not come on |
| U0134-87 |
Lost Communication with Power Steering Control Module Rear Missing Message |
Lost communication with rear steering link assembly (DRS ECU) |
- Rear steering link assembly (DRS ECU)
- CAN communication system
- Rack and pinion power steering gear assembly
|
EPS warning light: Does not come on |
| U0140-87 |
Lost Communication with Body Control Module Missing Message |
After the ignition switch is turned to ON, a communication malfunction with the main body ECU (multiplex network body ECU) continues for 10 seconds or more |
- Main body ECU (multiplex network body ECU)
- CAN communication system
- Rack and pinion power steering gear assembly
|
EPS warning light: Does not come on |
| U023A-87 |
Lost Communication with Image Processing Module "A" Missing Message |
After the ignition switch is turned to ON, a communication malfunction with the driving support ECU assembly continues for 10 seconds or more |
- Driving support ECU assembly
- CAN communication system
- Rack and pinion power steering gear assembly
|
EPS warning light: Does not come on |
| U1104-87 |
Lost Communication with Driving Support ECU Missing Message |
After the ignition switch is turned to ON, a communication malfunction with the driving support ECU assembly continues for 10 seconds or more |
- Driving support ECU assembly
- CAN communication system
- Rack and pinion power steering gear assembly
|
EPS warning light: Does not come on |
| U1110-87 |
Lost Communication with Intuitive Parking Assist Module Missing Message |
After the ignition switch is turned to ON, a communication malfunction with the clearance warning ECU assembly continues for 10 seconds or more |
- Clearance warning ECU assembly
- CAN communication system
- Rack and pinion power steering gear assembly
|
EPS warning light: Does not come on |