LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2019 >> LS 500 Base, AWD >> Repair and Diagnosis (Single Page) >> Steering >> Steering Column >> Power Tilt & Power Telescopic Steering Column System - Diagnostics - Introduction >> Power Tilt And Power Telescopic Steering Column System >> Customize Parameters [12/2017 - ] >> Customize Parameters [12/2017 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customize Parameters [12/2017 - ]

  1. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM 
    1. Customizing with the Techstream
      1. Connect the Techstream to the DLC3.
      2. Turn the engine switch on (IG).
      3. Enter the following menus: Body Electrical / Tilt & Telescopic / Utility / Customize.
      4. Select the setting by referring to the table below.

        Tilt & Telesco 

        Tester Display Description Default Setting ECU
        Autoaway/Return Operation Setting Turn the auto away/return function Tilt ON $0000:Tilt&Telescopic OFF,$0001:Telescopic ON,$0010:Tilt ON,$0011:Tilt&Telescopic ON Multiplex tilt and telescopic ECU
    2. Customizing with Mult-display
      1. Turn the engine switch on (IG).
      2. Select the setting by referring to the table below
      3. Select the following menus: Setup / Vehicle / Vehicle Customization / Other Vehicle Settings.
      4. Select the setting by referring to the table below.
        OTHER VEHICLE SETTINGS

        Display Description Default Setting Note
        Steering Column Easy-Exit Turn the auto away/return function Tilt Only Tilt Only / Telescopic Only / Tilt & Telescopic / Off -
scientia non olet · About LEMON Manuals