| U0100 |
Lost Communication With ECM/PCM "A" |
1 second or more after the engine switch is turned on (IG) with the power supply voltage between 10 and 16 V, a communication stop occurs with the ECM continuously for 3 seconds or more before active stabilizer suspension system control starts |
- CAN communication system
- ECM
|
DTCs common to the front and rear active stabilizers |
| U0129 |
Lost Communication with Brake System Control Module (Chassis Bus) |
2 seconds or more after the engine switch is turned on (IG) with the power supply voltage between 10 and 16 V, a communication stop occurs with the skid control ECU assembly (*1) or skid control ECU (brake actuator assembly) (*2) continuously for 3 seconds or more |
- CAN communication system
- Skid control ECU assembly (*1)
- Skid control ECU (Brake actuator assembly) (*2)
|
DTCs common to the front and rear active stabilizers |
| U0130 |
Lost Communication with Steering Effort Control Module |
1 second or more after the engine switch is turned on (IG) with the power supply voltage between 10 and 16 V, a communication stop occurs with the VGRS ECU (front steering control ECU) continuously for 3 seconds or more |
- CAN communication system
- VGRS ECU (Front steering control ECU)
|
DTCs common to the front and rear active stabilizers |
| U1108 |
Lost Communication with Front Stabilizer Module |
1 second or more after the engine switch is turned on (IG), a communication stop occurs between the rear active stabilizer control ECU assembly and front active stabilizer control ECU assembly continuously for 12 seconds or more. |
- CAN communication system
- Front active stabilizer control ECU assembly
|
- |
| U1109 |
Lost Communication With Rear Stabilizer Module |
1 second or more after the engine switch is turned on (IG), a communication stop occurs between the front active stabilizer control ECU assembly and front active stabilizer control ECU assembly continuously for 12 seconds or more. |
- CAN communication system
- Rear active stabilizer control ECU assembly
|
- |
| U1170 |
Lost Communication with Brake System Control Module(Chassis Local Bus) |
2 seconds or more after the engine switch is turned on (IG), a communication stop occurs with the skid control ECU assembly (*1) or skid control ECU (brake actuator assembly) (*2) continuously for 12 seconds or more |
- CAN communication system
- Skid control ECU assembly (*1)
- Skid control ECU (Brake actuator assembly) (*2)
|
DTCs common to the front and rear active stabilizers |