LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2019 >> LS 500 Base, AWD >> Repair and Diagnosis (Single Page) >> Suspension >> Suspension Control Systems >> Adaptive Variable Suspension System - Diagnostic Codes (2 Of 2) >> Adaptive Variable Suspension System >> DTC U0300-57: Internal Control Module Software Incompatibility Invalid / Incompatible Software Component [10/2023 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC U0300-57: Internal Control Module Software Incompatibility Invalid / Incompatible Software Component [10/2023 - ]: Procedure

  1. CHECK DTC 
    1. Check for DTCs.

      Chassis > Adaptive Variable Suspension System > Trouble Codes 

      Result

      Result Proceed to
      CAN communication malfunction DTC are not output A
      CAN communication DTC is output B

    Result: 

    GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2023 - ] 

    Result: 

    See step  2

  2. CONFIRM PART SENDING VEHICLE IDENTIFICATION INFORMATION 
    1. If a DTC is output due to replacement of a part sending vehicle identification information, check if a part with the correct part number is installed.
      Part Sending Vehicle Identification Information ECM
      NOTE:

      When removing parts to check parts sending vehicle identification information, be sure to follow the respective removal and installation procedures and precautions.

      Result

      Result Proceed to
      Part with incorrect part number is installed A
      Part with correct part number is installed, or part has not been replaced B

    Result: 

    REPLACE RELEVANT PART WITH A PART THAT HAS THE CORRECT PART NUMBER 

    Result: 

    See step  3

  3. PERFORM LOAD SPECIFICATION INFORMATION 

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  4

  4. CHECK DTC 
    1. Check for DTCs.

      Chassis > Adaptive Variable Suspension System > Trouble Codes 

      Result

      Result Proceed to
      U0300-57 is output A
      U0300-57 is not output B

    Result: 

    REPLACE ABSORBER CONTROL ECU. Refer to  REMOVAL [10/2023 - ] 

    Result: 

    END