Confirmation Driving Pattern

HINT: 

After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the All Readiness check procedure.

Refer to UTILITY [12/2017 - ]

1. Start the engine.
2. With the brake pedal depressed, move the shift lever as follows to select each shift state: R → D.
3. Drive the vehicle at 40 km/h (25 mph) or more for 10 seconds or more.
4. Stop the vehicle, with the brake pedal depressed and move the shift lever as follows to select each shift state: M → N.
5. Push the P position switch (shift position indicator) to select park (P).