Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory [12/2017 - 10/2022]: Procedure

1. Check radio condition.

   OK

   Broadcast cannot be selected

   Result

   Result	Proceed to
   Broadcast cannot be selected.	OK
   Broadcast cannot be selected, but selection cannot be memorized.	NG

Result: 

OK 

ADD PRESET CHANNEL INTO MEMORY AGAIN 

Result: 

NG 

See step  2

1. Check the number of preset channels.

   OK

   36 channels have already been preset.

   Result

   Proceed to
   OK
   NG

Result: 

OK 

END (ONLY 36 CHANNELS CAN BE PRESET) 

Result: 

NG 

See step  3

1. Check if the battery was replaced.

   OK

   Battery was not replaced.

   Result

   Result
   OK
   NG

Result: 

OK 

REPLACE RADIO RECEIVER ASSEMBLY. Refer to  REMOVAL [12/2017 - 10/2022] 

Result: 

NG 

See step  4

1. Check if the preset channels that have been cleared can be added into memory again.

   OK

   Preset channels can be added into memory.

   Result

   Result
   OK
   NG

Result: 

OK 

END 

Result: 

NG 

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE. Refer to  PROBLEM SYMPTOMS TABLE [12/2017 - 09/2018]  , or refer to  PROBLEM SYMPTOMS TABLE [09/2018 - 10/2020]  , or refer to  PROBLEM SYMPTOMS TABLE [10/2020 - 10/2022]