LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2019 >> LS 500h RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Panoramic View Monitor System - Diagnostics - Introduction) >> Panoramic View Monitor System >> DTC Check / Clear [10/2023 - ] >> DTC Check / Clear [10/2023 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Check / Clear [10/2023 - ]

WARNING: This page is about a different car, the 2024 Lexus LS 500h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Chassis / Circumference Monitoring Camera Control Module / Trouble Codes.
    5. Check the details of the DTCs.

      Refer to Image from Camera for Panoramic View Monitor is Abnormal [10/2023 - ]

      Chassis > Circumference Monitoring Camera Control Module > Trouble Codes 

  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Chassis / Circumference Monitoring Camera Control Module / Trouble Codes.
    5. According to the display on the Techstream, select the trouble code data display with the clear button.

      Chassis > Circumference Monitoring Camera Control Module > Clear DTCs 

scientia non olet · About LEMON Manuals