Precaution [11/2017 - 10/2018]
- INITIALIZATION NOTE:
- Before replacing the ECM, refer to Registration.
Refer to REGISTRATION [11/2017 - 11/2019]
- Perform Registration (VIN registration) after replacing the ECM.
Refer to REGISTRATION [11/2017 - ]
- Perform Learning Value Reset and Idle Learning after replacing or servicing parts related to engine operation.
Refer to INITIALIZATION [11/2017 - 10/2018]
- Make sure to perform Reset Memory (A/T initialization), when replacing the automatic transmission assembly, ECM or engine assembly.
- for 2WD models: Refer to INITIALIZATION [11/2017 - ]
- for AWD models: Refer to INITIALIZATION [11/2017 - ]
- When the cable is disconnected from the negative (-) battery terminal, initialize the following system(s) after the cable is reconnected.
System Name See Procedure Lane Departure Alert System (w/ Steering Control) Refer to INITIALIZATION [11/2017 - 10/2018] Variable Gear Ratio Steering System Parking Assist Monitor System Pre-collision System Air Conditioning System
- Before replacing the ECM, refer to Registration.
- WHEN USING TECHSTREAM WARNING:
Observe the following items for safety reasons:
- Before using the Techstream, read the instruction manual.
- Prevent the Techstream cable from being caught on the pedals, shift lever or steering wheel when driving with the Techstream connected to the vehicle.
- When driving the vehicle for testing purposes using the Techstream, 2 persons are required. One drives the vehicle, and the other operates the Techstream.