Check For Intermittent Problems [10/2018 - ]
NOTE:
- If the vehicle or vehicle controls are operated (for example, during initial inspection when the vehicle is brought in for repair) before operation history has been read and saved, the operation history information could be lost.
- The Operation History function uses the current system time of the Techstream and the time counter inside the controlling ECU to calculate the times shown in the operation history. For this reason, before reading the operation history, first make sure that the Techstream system clock is accurately set to the current time.
- CHECK OPERATION HISTORY
HINT:
The windshield wiper motor assembly records the wiper and washer system operation history, which can be read using the Techstream.
- Connect the Techstream to the DLC3.
- Turn the ignition switch to ON.
- Turn the Techstream on.
- Enter the following menus: Body Electrical / Wiper / Utility / Operation History.
Body Electrical > Wiper > Utility
Tester Display Operation History - Following the instructions on the screen, read and save the Operation History.
Tester Display Motor Lock Detection Temperature Protection Detection Overvoltage Detection Low Voltage Detection
- SYMPTOM SIMULATION