Driver Seat Easy Access Buckle Function does not Operate [12/2017 - 10/2023]: Procedure
- CHECK FRONT POWER SEAT CONTROL SYSTEM
- Operate the power seat switch and check that the head rest and pneumatic support function operate normally.
Refer to OPERATION CHECK [12/2017 - 09/2019] , or refer to OPERATION CHECK [09/2019 - 10/2020] , or refer to OPERATION CHECK [10/2020 - 10/2022] , or refer to OPERATION CHECK [10/2022 - 10/2023]
OK
The head rest and pneumatic support function operate normally.
Result
Proceed to OK NG
Result:
NG
GO TO FRONT POWER SEAT CONTROL SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2017 - 10/2023]
Result:
OK
See step 2
- Operate the power seat switch and check that the head rest and pneumatic support function operate normally.
- READ VALUE USING TECHSTREAM (FL DOOR COURTESY SW)
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / Main Body / Data List.
- Read the Data List according to the display on the Techstream.
Body Electrical > Main Body > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note FL Door Courtesy SW Front door courtesy light switch LH signal OFF or ON OFF: Front door LH closed
ON: Front door LH open- Body Electrical > Main Body > Data List
Tester Display FL Door Courtesy SW OK
On the Techstream screen, ON or OFF is displayed for each item according to the table above.
Result
Proceed to OK NG
Result:
NG
GO TO LIGHTING SYSTEM. Refer to Door Courtesy Switch Circuit [12/2017 - 10/2023]
Result:
OK
See step 3
- INSPECT FRONT SEAT INNER BELT ASSEMBLY LH (BUCKLE MOTOR, BUCKLE SWITCH)
- Remove the front seat inner belt assembly LH (buckle motor, buckle switch).
Refer to REMOVAL [12/2017 - 09/2018] , or refer to REMOVAL [09/2018 - 10/2020] , or refer to REMOVAL [10/2020 - 10/2022] , or refer to REMOVAL [10/2022 - 10/2023]
- Inspect the front seat inner belt assembly LH (buckle motor, buckle switch).
Refer to INSPECTION [12/2017 - ]
Result
Proceed to OK NG
Result:
OK
REPLACE POSITION CONTROL ECU ASSEMBLY. Refer to REMOVAL [12/2017 - 09/2018] , or refer to REMOVAL [09/2018 - 10/2020] , or refer to REMOVAL [10/2020 - 10/2022] , or refer to REMOVAL [10/2022 - 10/2023]
Result:
NG
REPLACE FRONT SEAT INNER BELT ASSEMBLY LH. Refer to REMOVAL [12/2017 - 09/2018] , or refer to REMOVAL [09/2018 - 10/2020] , or refer to REMOVAL [10/2020 - 10/2022] , or refer to REMOVAL [10/2022 - 10/2023]
- Remove the front seat inner belt assembly LH (buckle motor, buckle switch).