DTC U0100: Lost Communication With ECM/PCM "A"; DTC U0129: Lost Communication with Brake System Control Module (Chassis Bus); DTC U0130: Lost Communication with Steering Effort Control Module; DTC U1108: Lost Communication with Front Stabilizer Module; DTC U1109: Lost Communication With Rear Stabilizer Module; DTC U1170: Lost Communication with Brake System Control Module(Chassis Local Bus) [12/2017 - 10/2023]: Procedure

1. Using the Techstream, clear the DTC.

   Refer to DTC CHECK / CLEAR [12/2017 - 10/2023]

   Chassis > Front Stabilizer > Clear DTCs 

   Chassis > Rear Stabilizer > Clear DTCs 

2. Turn the engine switch off.

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  2

1. Using the Techstream, check for DTCs.

   Refer to DTC CHECK / CLEAR [12/2017 - 10/2023]

   Chassis > Front Stabilizer > Trouble Codes 

   Chassis > Rear Stabilizer > Trouble Codes 

   Result

   Result	Proceed to
   DTC is not output	A
   DTC is output	B

Result: 

A 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [12/2017 - 09/2018]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [09/2018 - 10/2020]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2020 - 11/2021]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2021 - 10/2022]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2022 - 10/2023] 

Result: 

B 

GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [12/2017 - 09/2018]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [09/2018 - 10/2020]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2020 - 10/2023]