Entry Unlock and Unlatch Functions do not Operate Using Kick Sensor [10/2018 - ]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Customize Setting / PSD & PBD operation.

   PSD & PBD operation 

   Tester Display	Description	Default	Setting	ECU
   Kick Sensor Function	Function that enables/disables the touchless power back door.	ON	0:OFF, 1:ON	Multiplex network door ECU

   Result

   Result	Proceed to
   The customize setting is "ON"	A
   The customize setting is "OFF"	B

Result: 

B 

PERFORM CUSTOMIZE SETTING. Refer to  CUSTOMIZE PARAMETERS [10/2018 - ] 

Result: 

A 

See step  2

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Smart Access / Utility / Operation History.
   AUTO ENTRY WIRELESS OPERATION HISTORY
   
   

   Parameter Name	Content
   Kick Sensor Open Request Signal	The multiplex network door ECU receives kick detection signals from the kick door control sensor and sends certification requests to the certification ECU (smart key ECU assembly). If certification is OK, an open permission is sent to the multiplex network door ECU.

   Body Electrical > Smart Access > Utility 

   Tester Display
   Operation History

   Result

   Result	Proceed to
   Not output	A
   "Kick Sensor Open Request Signal" is output	B

Result: 

B 

GO TO POWER BACK DOOR SYSTEM. Refer to  PROBLEM SYMPTOMS TABLE [10/2018 - 07/2022]  , or refer to  PROBLEM SYMPTOMS TABLE [07/2022 - ] 

Result: 

A 

See step  3

1. Check that the entry back door open function operates.

   Refer to OPERATION CHECK [10/2018 - 08/2021] , or refer to OPERATION CHECK [08/2021 - ]

   Result

   Result	Proceed to
   Entry back door open function does not operate normally	A
   Entry back door open function operates normally	B

Result: 

A 

GO TO SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Entry Function). Refer to  Back Door Entry Lock and Unlock Functions do not Operate [10/2018 - ]  

Result: 

B 

GO TO POWER BACK DOOR SYSTEM (Power Back Door cannot be Operated Using Kick Sensor). Refer to  Power Back Door cannot be Operated Using Kick Sensor [10/2018 - 07/2022]  , or refer to  Power Back Door cannot be Operated Using Kick Sensor [07/2022 - ]