DTC U0103: Lost Communication with Gear Shift Module "A"; DTC U0129: Lost Communication with Brake System Control Module; DTC U0140: Lost Communication with Body Control Module; DTC U0142: Lost Communication with Main Body ECU; DTC U0155: Lost Communication with Combination Meter; DTC U0230: Lost Communication with Rear Gate Module; DTC U1117: Lost Communication with Accessory Gateway [10/2017 - 10/2020]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Smart Access, Power Source Control / Trouble Codes.
5. Check for DTCs and note any DTCs that are output.

   Body Electrical > Smart Access > Trouble Codes 

   Body Electrical > Power Source Control > Trouble Codes 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING). Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2017 - 09/2018]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [09/2018 - 10/2020]