LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2021 >> NX 300 Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Front Camera System - Diagnostic Codes & Symptom Tests >> Front Camera System >> DTC U0322-57: Software Incompatibility with Body Control Module Invalid/Incompatible Software Component [05/2019 - ] >> Caution / Notice / Hint
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Caution / Notice / Hint

NOTE:
  • Before replacing the main body ECU (multiplex network body ECU), refer to Registration.
  • When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
  • If the forward recognition camera has been replaced with a new one, be sure to perform forward recognition camera adjustment.

    HINT: 

    Forward recognition camera adjustment can be performed by using either "One Time Recognition" or "Sequential Recognition".

    One Time Recognition:

    Refer to ADJUSTMENT (ONE TIME RECOGNITION) [05/2019 - ]

    Sequential Recognition:

    Refer to ADJUSTMENT (SEQUENTIAL RECOGNITION) [05/2019 - ]