DTC U0074-88: Control Module Communication Bus "B" Off Bus Off; DTC U0100-87: Lost Communication With ECM/PCM "A" Missing Message; DTC U0101-87: Lost Communication with TCM Missing Message; DTC U0125-87: Lost Communication with Multi-axis Acceleration Sensor Module Missing Message; DTC U0126-87: Lost Communication with Steering Angle Sensor Module Missing Message; DTC U1106-87: Lost Communication with Electric Parking Brake Module Missing Message [05/2019 - ]: Procedure

1. Turn the engine switch off.
2. Record the output DTCs (for VSC system and/or CAN communication system).

   for VSC system: Refer to DTC CHECK / CLEAR [05/2019 - ]

   Refer to DIAGNOSIS SYSTEM [05/2019 - 10/2019] , or refer to DIAGNOSIS SYSTEM [10/2019 - 07/2020] , or refer to DIAGNOSIS SYSTEM [07/2020 - ]

   Chassis > Brake > Trouble Codes 

   HINT: 

   If the CAN communication system DTC and the relevant sensor DTCs are output simultaneously, troubleshoot the relevant sensor DTCs (for VSC system) after the CAN communication system returns to normal.

   Result

   Result	Proceed to
   DTC (relating to CAN communication system) is output	A
   DTC (relating to VSC system) is output	B
   DTC is not output	C

Result: 

A 

CHECK CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [05/2019 - ] 

Result: 

B 

REPAIR CIRCUIT INDICATED BY OUTPUT DTC. Refer to  DIAGNOSTIC TROUBLE CODE CHART [05/2019 - ] 

Result: 

C 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [05/2019 - 10/2019]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2019 - 07/2020]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [07/2020 - ]