Monitor Description
The ECM monitors the signals received from the throttle position sensor No. 1 and stop light switch assembly. As the ECM monitors the STP signal of the stop light switch assembly and the VTA1 signal of the throttle position sensor No. 1, if these signals do not correlate, the DTC is stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P060E-49 | Internal Control Module Throttle Position Performance Internal Electronic Failure | Either of the following conditions is met (1 trip detection logic):
|
ECM | Comes on | DTC stored | SAE: P060E |
| P061E-49 | Internal Control Module Brake Signal Internal Electronic Failure | Either of the following conditions is met (1 trip detection logic):
|
ECM | Comes on | DTC stored | SAE: P061E |