LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2021 >> RX 350 Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Exterior Lights >> Lighting System (W/ Automatic Headlight Beam Level Control System) - Diagnostic Codes >> LIGHTING SYSTEM (w/ Automatic Headlight Beam Level Control System) >> DTC B2416: Height Control Sensor; DTC B241A: Rear Height Control Sensor [08/2019 - ] >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC B2416: Height Control Sensor; DTC B241A: Rear Height Control Sensor [08/2019 - ]: Description

The No. 1 headlight ECU sub-assembly LH determines the vehicle height and performs automatic headlight beam level control based on signals from the rear height control sensor sub-assembly RH via direct line.

FOR MULTIPLE BEAM HEADLIGHT

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
B2416 Height Control Sensor Detection condition: 
  1. The engine switch is on (IG).

Malfunction status: 
  1. Abnormal power source voltage continuously detected

Malfunction duration: 
  1. 5 seconds or more
  • Rear height control sensor sub-assembly RH
  • Harness or connector
  • No. 1 headlight ECU sub-assembly LH
AFS
B241A Rear Height Control Sensor Detection condition: 
  1. The engine switch is on (IG).

Malfunction status: 
  1. Abnormal vehicle height continuously detected

Malfunction duration: 
  1. 5 seconds or more
  • Rear height control sensor sub-assembly RH
  • Harness or connector
  • No. 1 headlight ECU sub-assembly LH
AFS
FOR SINGLE BEAM HEADLIGHT

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
B2416 Height Control Sensor Detection condition: 
  1. The engine switch is on (IG).

Malfunction status: 
  1. Abnormal power source voltage continuously detected

Malfunction duration: 
  1. 5 seconds or more
  • Rear height control sensor sub-assembly RH
  • Harness or connector
  • No. 1 headlight ECU sub-assembly LH
HL Auto Leveling
B241A Rear Height Control Sensor Detection condition: 
  1. The engine switch is on (IG).

Malfunction status: 
  1. Abnormal vehicle height continuously detected

Malfunction duration: 
  1. 5 seconds or more
  • Rear height control sensor sub-assembly RH
  • Harness or connector
  • No. 1 headlight ECU sub-assembly LH
HL Auto Leveling