Typical Malfunction Thresholds
CASE 1
| Either of the following conditions is met (2 data) | 1 or 2 |
| 1. Either of the following conditions is met | (a), (b) or (c) (More than 10 time) |
| (a) EEPROM communication timeout | Occurred |
| (b) Permanent Fault Code | Not stored |
| (c) Permanent Fault Code | Not equal to commanded Fault Code |
| 2. Storing processing | Not completed (More than 0.096 seconds) |
CASE 2
| Either of the following conditions is met (2 data) | 1 or 2 |
| 1. Either of the following conditions is met | (a) or (b) (More than 10 time) |
| (a) EEPROM communication timeout | Occurred |
| (b) Permanent Fault Code | Stored |
| 2. Clearing processing | Not completed (More than 0.096 seconds) |
CASE 3
| Either of the following conditions is met (2 data) | 1 or 2 |
| 1. Either of the following conditions is met | (a) or (b) |
| (a) EEPROM communication timeout | Occurred (More than 10 time) |
| (b) Reading processing | Not completed (More than 0.096 seconds) |
| 2. Permanent Fault Code data | Mismatch (More than 10 time) |