Caution / Notice / Hint

NOTE:

Before performing troubleshooting, inspect the connectors of related circuits.
Before replacing the absorber control ECU, perform all of the following:
- Symptom simulation.
  Refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2018 - ]
- DTC inspection.
  Refer to DTC CHECK / CLEAR [08/2021 - ]
- Techstream inspection.
  Refer to DATA LIST / ACTIVE TEST [08/2021 - ]
  - If no malfunctions are found in other areas, replace the absorber control ECU.
After replacing the absorber control ECU with a new one, perform registration of vehicle identification information.
Refer to TEST MODE PROCEDURE [08/2021 - ]