LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2022 >> NX 350 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Front Camera System - Diagnostic Codes & Circuit Tests >> Front Camera System >> DTC U0300-51: Internal Control Module Software Incompatibility Not Programmed; DTC U0300-57: Internal Control Module Software Incompatibility Invalid/Incompatible Software Component [11/2021 - ] >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC U0300-51: Internal Control Module Software Incompatibility Not Programmed; DTC U0300-57: Internal Control Module Software Incompatibility Invalid/Incompatible Software Component [11/2021 - ]: Description

for Gasoline Model: 

for HEV Model: 

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
U0300-51 Internal Control Module Software Incompatibility Not Programmed for Gasoline Model: 
  1. When the forward recognition camera cannot confirm the Powertrain Information based on Powertrain Information sent from ECM

for HEV Model: 

  1. When the forward recognition camera cannot confirm the Powertrain Information based on Powertrain Information sent from the hybrid vehicle control ECU
for Gasoline Model: 
  • SFI system
  • Forward recognition camera

for HEV Model: 

  • Hybrid control system
  • Forward recognition camera
Front Recognition Camera
U0300-57 Internal Control Module Software Incompatibility Invalid/Incompatible Software Component for Gasoline Model: 
  1. When the Powertrain Information value sent from ECM does not match the value stored in the forward recognition camera

for HEV Model: 

  1. When the Powertrain Information value sent from the hybrid vehicle control ECU does not match the value stored in the forward recognition camera
for Gasoline Model: 
  • SFI system
  • Forward recognition camera

for HEV Model: 

  • Hybrid control system
  • Forward recognition camera
Front Recognition Camera