DTC P062F-44: Internal Control Module EEPROM Data Memory Failure [11/2021 - ]: Procedure

1. Clear the DTCs.

   Powertrain > Transmission > Clear DTCs 

   HINT: 

   Write down the currently output DTCs before clearing them.

2. Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.
3. Connect the cable to the negative (-) battery terminal.
4. Read the DTCs using the GTS.

   Powertrain > Transmission > Trouble Codes 

   Result

   Result	Proceed to
   DTCs are not output	A
   DTC P062F-44 is output	B

Result: 

A 

CHECK FOR INTERMITTENT PROBLEMS. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2021 - ] 

Result: 

B 

See step  2

Refer to REMOVAL [11/2021 - ]

Result

Result: 

NEXT 

PERFORM REGISTRATION. Refer to  REGISTRATION [11/2021 - ]