DTC P18A6-00: Gear Shift Control Module "A"/"B" (Sub CPU) Ignition Switch On/Start Position Signal Compare Failure; DTC P18A6-62: Gear Shift Control Module "A"/"B" Ignition Switch On/Start Position Signal Compare Failure [11/2021 - ]: Description
The shift actuator ECU activates when receiving an IGR signal.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate | DTC Output from | Priority | Note |
|---|---|---|---|---|---|---|---|---|
| P18A6-00 | Gear Shift Control Module "A"/"B" (Sub CPU) Ignition Switch On/Start Position Signal Compare Failure | When the ignition switch is ON and the BUB1 voltage is a certain value or more, a malfunction of the IGR1 terminal voltage is detected (1 trip detection logic) |
|
Does not come on | Multi-information Display Error Message
|
Transmission | A | SAE: P18A6 |
| P18A6-62 | Gear Shift Control Module "A"/"B" Ignition Switch On/Start Position Signal Compare Failure | When the ignition switch is ON and the BAT1 voltage is a certain value or more, a malfunction of the IGR1 terminal voltage is detected (1 trip detection logic) |
|
Does not come on | Multi-information Display Error Message
|
Transmission | A | SAE: P18A6 |