DTC P2E00-64: Gear Lever Position Sensor "A" Signal Plausibility Failure; DTC P2E04-64: Gear Lever Position Sensor "B" Signal Plausibility Failure; DTC P2E08-64: Gear Lever Position Sensor "C" Signal Plausibility Failure [11/2021 - ]: Description
The shift control ECU and 3 shift sensors are built into the transmission floor shift assembly.
The shift control ECU monitors the angle information of the shift sensors and power supply voltage for sensors.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate | DTC Output from | Priority | Note |
|---|---|---|---|---|---|---|---|---|
| P2E00-64 | Gear Lever Position Sensor "A" Signal Plausibility Failure | When the battery voltage is a certain value or more, any of the following is met:
(1 trip detection logic) |
Transmission floor shift assembly (shift control ECU) | Comes on | Multi-information Display Error Message
|
Transmission | A | SAE: P2E01 |
| P2E04-64 | Gear Lever Position Sensor "B" Signal Plausibility Failure | When the battery voltage is a certain value or more, any of the following is met:
(1 trip detection logic) |
Transmission floor shift assembly (shift control ECU) | Comes on | Multi-information Display Error Message
|
Transmission | A | SAE: P2E05 |
| P2E08-64 | Gear Lever Position Sensor "C" Signal Plausibility Failure | When the battery voltage is a certain value or more, any of the following is met:
(1 trip detection logic) |
Transmission floor shift assembly (shift control ECU) | Comes on | Multi-information Display Error Message
|
Transmission | A | SAE: P2E09 |