LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2022 >> NX 450h+ Base >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Electronic A/T Shift Lever System - Diagnostic Codes & Circuit Tests >> Electronic Shift Lever System >> DTC P176D-12: IG2 Signal (Gear Shift Control Module "A") Circuit Short to Auxiliary Battery [11/2021 - ] >> Confirmation Driving Pattern
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Confirmation Driving Pattern

HINT: 

After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the All Readiness check procedure.

  1. Turn the ignition switch to ON and wait for 1 minute or more.
  2. Turn the ignition switch to off and wait for 1 minute or more.