DTC P0705-13: Transmission Range Sensor "A" Circuit Open; DTC P0705-62: Transmission Range Sensor "A" Signal Compare Failure [06/2018 - ]: Description
The park/neutral position switch assembly detects the shift lever position and sends signals to the ECM.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P0705-13 | Transmission Range Sensor "A" Circuit Open | When the engine switch is on (IG) and battery voltage is 8 V or more, NSW, P, R, N and D input signals are all OFF simultaneously for 60 seconds or more (2-trip detection logic). |
|
Comes on | DTC stored | SAE Code: P0705 |
| P0705-62 | Transmission Range Sensor "A" Signal Compare Failure | When the engine switch is on (IG) and battery voltage is 8 V or more, 2 or more of the following signals are ON simultaneously for 2 seconds or more (2-trip detection logic).
|
|
Comes on | DTC stored | SAE Code: P0705 |
DTC DETECTION CONDITION PATTERNS (P0705-62):
| Vehicle Condition | |||||
|---|---|---|---|---|---|
| Pattern 1 | Pattern 2 | Pattern 3 | Pattern 4 | ||
| Diagnostic Condition | Engine switch is on (IG) | ◦ | ◦ | ◦ | ◦ |
| Battery voltage is 8 V or more | ◦ | ◦ | ◦ | ◦ | |
| Malfunction Condition | NSW input signal is ON | ◦ | ◦ | - | - |
| P input signal is ON | - | - | ◦ | ◦ | |
| R input signal is ON | - | ◦ | - | ◦ | |
| N input signal is ON | - | - | - | - | |
| D input signal is ON | ◦ | - | ◦ | - | |
| Duration | 2 seconds or more | 2 seconds or more | 2 seconds or more | 2 seconds or more | |
| Detection Logic | 2-trip detection logic | 2-trip detection logic | 2-trip detection logic | 2-trip detection logic | |
DTC DETECTION CONDITION PATTERNS (P0705-62):
| Vehicle Condition | ||||
|---|---|---|---|---|
| Pattern 5 | Pattern 6 | Pattern 7 | ||
| Diagnostic Condition | Engine switch is on (IG) | ◦ | ◦ | ◦ |
| Battery voltage is 8 V or more | ◦ | ◦ | ◦ | |
| Malfunction Condition | NSW input signal is ON | - | - | - |
| P input signal is ON | - | - | - | |
| R input signal is ON | - | ◦ | ◦ | |
| N input signal is ON | ◦ | ◦ | - | |
| D input signal is ON | ◦ | - | ◦ | |
| Duration | 2 seconds or more | 2 seconds or more | 2 seconds or more | |
| Detection Logic | 2-trip detection logic | 2-trip detection logic | 2-trip detection logic | |
HINT:
DTC P0705-62 is stored when any of the above detection patterns is met.