DTC P060D-49: Internal Control Module Accelerator Pedal Position Performance Internal Electronic Failure [12/2021 - ]: Procedure

Pre-procedure1

• None

• Clear the DTCs.

  Powertrain > Engine > Clear DTCs 

  Result

  Proceed to
  NEXT

Post-procedure1

• Turn the ignition switch off.

Result: 

NEXT 

See step  2

Pre-procedure1

• Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.
• Connect the cable to the negative (-) battery terminal.
• Turn the ignition switch to ON.
• Wait 16 seconds or more.

• Read the DTCs.

  Powertrain > Engine > Trouble Codes 

  Result

  Result	Proceed to
  DTCs are not output	A
  P060D-49 is output	B

Post-procedure1

• None

Result: 

A 

CHECK FOR INTERMITTENT PROBLEMS. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [12/2021 - ] 

Result: 

B 

REPLACE ECM. Refer to  REMOVAL [12/2021 - ]