How To Proceed With Troubleshooting [12/2021 - ]: Procedure

Result

Result: 

NEXT 

See step  2

1. Interview the customer to confirm the trouble.

   Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2021 - ]

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  3

1. Measure the battery voltage.

   Standard voltage

   11 to 14 V

   If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

2. Check the fuses and relays.
3. Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  4

1. Using the GTS, check if the CAN communication system is functioning normally.

   Refer to DIAGNOSIS SYSTEM [12/2021 - ]

   Result

   Result	Proceed to
   CAN DTCs are not output	A
   CAN DTCs are output	B

Result: 

B 

GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [12/2021 - ] 

Result: 

A 

See step  5

1. Using the GTS, check for CXPI communication system DTCs.

   Result

   Result	Proceed to
   CAN DTCs are not output	A
   CAN DTCs are output	B

Result: 

B 

GO TO CXPI COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [12/2021 - ] 

Result: 

A 

See step  6

1. Check the operation of the speedometer and shift indicator on the combination meter assembly.

   OK

   The speedometer and shift indicator on the combination meter assembly operate normally.

   Result

   Proceed to
   OK
   NG

Result: 

NG 

GO TO METER / GAUGE SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [12/2021 - ] 

Result: 

OK 

See step  7

1. Refer to Problem Symptoms Table.

   Refer to PROBLEM SYMPTOMS TABLE [12/2021 - ] 

   Result

   Result	Proceed to
   Fault is not listed in problem symptoms table	A
   Fault is listed in problem symptoms table	B

Result: 

B 

See step  9

Result: 

A 

See step  8

1. Data List / Active Test

   Refer to DATA LIST / ACTIVE TEST [12/2021 - ] 

2. Terminals of ECU

   Refer to TERMINALS OF ECU [12/2021 - ] 

3. Operation check

   Refer to OPERATION CHECK [12/2021 - ] 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  9

Result

Result: 

NEXT 

See step  10

Result

Result: 

NEXT 

END