DTC P062F-44: Internal Control Module EEPROM Data Memory Failure [12/2021 - ]: Procedure

1. Clear the DTCs.

   Powertrain > Transmission > Clear DTCs 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  2

Pre-procedure1

1. Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.
2. Connect the cable to the negative (-) battery terminal.
3. Turn the ignition switch to ON.

   Procedure1

4. Read the DTCs.

   Powertrain > Transmission > Trouble Codes 

   Result

   Result	Proceed to
   DTCs are not output	A
   DTC P062F-44 is output	B

   Post-procedure1

5. None.

Result: 

A 

CHECK FOR INTERMITTENT PROBLEMS 

Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2021 - ]

Refer to ELECTRONIC CIRCUIT INSPECTION PROCEDURE [12/2021 - ]

Result: 

B 

See step  3

HINT: 

Refer to REMOVAL [12/2021 - ]

Result

Result: 

NEXT 

PERFORM A/T CODE REGISTRATION. Refer to  REGISTRATION [12/2021 - ]