DTC B2285-62: Steering Lock Position Signal Compare Failure [03/2023 - ]: Procedure

1. Check for DTCs.

   Body Electrical > Smart Access > Trouble Codes 

   Result

   Result	Proceed to
   B2785-88 is not output	A
   B2785-88 is output	B

Result: 

B 

GO TO DTC B2785-88. Refer to  DTC B2785-88: Communication between ECUs connected by LIN Bus off [03/2023 - ] 

Result: 

A 

See step  2

1. Disconnect the D58 certification ECU (smart key ECU assembly) connector.
2. Measure the resistance according to the value(s) in the table below.

   Standard Resistance

   Tester Connection	Condition	Specified Condition
   D58-11 (SLP) - Body ground	Always	Below 1 Ω

   Result

   Proceed to
   OK
   NG

Result: 

OK 

REPLACE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY). Refer to  REMOVAL [11/2021 - ] 

Result: 

NG 

REPAIR OR REPLACE HARNESS OR CONNECTOR