LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2023 >> NX 350 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Lighting System (W/ Level Control) - Diagnostic Codes (2 Of 2) & Circuit Tests >> LIGHTING SYSTEM (w/ Automatic Headlight Beam Level Control System) >> DTC U023A-87: Lost Communication with Image Processing Module "A" [03/2022 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC U023A-87: Lost Communication with Image Processing Module "A" [03/2022 - ]: Procedure

  1. CHECK FOR DTC 
    1. Check the DTCs and output pattern according to the following table.

      Body Electrical > Headlight Control > Trouble Codes 

      Chassis > Front Recognition Camera > Trouble Codes 

      Pattern DTC output part name
      (Display on GTS)
      Headlight Control Front Recognition Camera
      Pattern 1 U023A-87 U0232-87 U0241-87 U1236-87*
      Pattern 2 U023A-87 - U0241-87 -
      1. *: w/ Front Cross Traffic Alert

      Result

      Result Proceed to
      Output in pattern 1 A
      Output in pattern 2 B

    Result: 

    GO TO FRONT CAMERA SYSTEM. Refer to  DTC U0232-87: Lost Communication with Side Obstacle Detection Control Module "A" Missing Message; DTC U0241-87: Lost Communication with Headlamp Control Module "A" Missing Message; DTC U1236-87: Lost Communication with Cruise Control Front Distance Range Sensor Front Side "B" Missing Message [03/2022 - ] 

    Result: 

    See step  2

  2. CHECK CAN MAIN WIRE (FORWARD RECOGNITION CAMERA) 

    Pre-procedure1

    GTY1070928Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    *a Front view of wire harness connector
    (to Forward Recognition Camera)
    1. Disconnect the M17 forward recognition camera connector.
    2. Disconnect the cable from the negative (-) auxiliary battery terminal.

      Procedure1

    3. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      M17-4 (CA3H) - M17-3 (CA3L) Cable disconnected from negative (-) auxiliary battery terminal 108 to 132 Ω

      Result

      Proceed to
      OK
      NG

      Post-procedure1

    4. None

    Result: 

    OK 

    REPLACE FORWARD RECOGNITION CAMERA. Refer to  REMOVAL [11/2021 - ] 

    Result: 

    NG 

    REPAIR OR REPLACE HARNESS OR CONNECTOR