DTC U0074-88: Control Module Communication Bus "B" Off Bus Off; DTC U0100-87: Lost Communication with ECM/PCM "A" Missing Message; DTC U0101-87: Lost Communication with TCM Missing Message; DTC U0125-87: Lost Communication With Multi-axis Acceleration Sensor Module Missing Message; DTC U0126-87: Lost Communication with Steering Angle Sensor Module Missing Message; DTC U0131-87: Lost Communication With Power Steering Control Module Missing Message; DTC U0140-87: Lost Communication with Body Control Module Missing Message; DTC U0151-87: Lost Communication with Restraints Control Module Missing Message [06/2018 - ]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Operate the Techstream to clear the codes. Enter the following menus: Chassis / Brake/EPB / Trouble Codes.

   Chassis > Brake/EPB > Clear DTCs 

4. Press the DTC clear button.
5. Turn the engine switch off.
6. Turn the engine switch on (IG).
7. Enter the following menus: System Select / Health Check.
8. Check for DTCs.

   Result

   Result	Proceed to
   DTCs for related systems are output together with DTC U0074-88, U0100-87, U0101-87, U0125-87, U0126-87, U0131-87, U0140-87 or U0151-87.	A
   U0074-88, U0100-87, U0101-87, U0125-87, U0126-87, U0131-87, U0140-87 or U0151-87 is output.	B
   DTCs are not output.	C

Result: 

A 

GO TO DIAGNOSTIC TROUBLE CODE CHART (RELATED SYSTEM). Refer to  DIAGNOSTIC TROUBLE CODE CHART [06/2018 - 08/2020]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [08/2020 - ] 

Result: 

B 

INSPECT CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [06/2018 - ] 

Result: 

C 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [06/2018 - ]