Customize Parameters [12/2021 - ]
- CUSTOMIZE SEAT BELT WARNING SYSTEM NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- These buzzers should be on for safe driving. Perform this procedure only if it is necessary to set the buzzer to off (disabled).
HINT:
The following items can be customized.
- Customizing with the GTS
- Select the setting by referring to the table below.
Warning
Tester Display Description Default Setting ECU Driver Seatbelt Warning Buzzer Function Enables sounding of the driver seat belt warning buzzer ON $00:OFF, $01:ON Combination meter assembly Passenger Seatbelt Warning Buzzer Function Enables sounding of the front passenger seat belt warning buzzer ON $00:OFF, $01:ON Combination meter assembly Rear Right Seatbelt Warning Buzzer Function Enables sounding of the rear RH seat belt warning buzzer ON $00:OFF, $01:ON Combination meter assembly Rear Left Seatbelt Warning Buzzer Function Enables sounding of the rear LH seat belt warning buzzer ON $00:OFF, $01:ON Combination meter assembly Rear Center Seatbelt Warning Buzzer Function Enables sounding of the rear center seat belt warning buzzer*1 ON $00:OFF, $01:ON Combination meter assembly 3rd Right Seatbelt Warning Buzzer Function Function to sound the rear No. 2 RH seat belt warning buzzer*2 ON $00:OFF, $01:ON Combination meter assembly 3rd Left Seatbelt Warning Buzzer Function Function to sound the rear No. 2 LH seat belt warning buzzer*2 ON $00:OFF, $01:ON Combination meter assembly - *1: except VIP Captain Seat
- *2: w/ Rear No. 2 Seat Belt Warning
HINT:
These settings are only valid when the vehicle is driven at approximately 20 km/h (12 mph) or more.
- Select the setting by referring to the table below.