DTC P0615-62: Starter Relay Signal Compare Failure [12/2021 - 10/2023]: Description

When the STA signal detected by the ECM and by the engine stop and start ECU do not match, the engine stop and start ECU stores DTC P0615-62 and blinks the stop and start cancel indicator.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	Warning Indicate	DTC Output from	Priority	Note
P0615-62	Starter Relay Signal Compare Failure	Both of the following conditions are met for 2 seconds or more (1 trip detection logic): Normal communication with the ECM. The STA signal detected by the ECM and STA2 signal detected by the engine stop and start ECU do not match.	Wire harness or connector ST NO. 1 relay ST NO. 2 relay Engine stop and start ECU Starter assembly ECM	Blinks	Stop and Start	A	SAE Code: P0615