DTC U0300-51: Internal Control Module Software Incompatibility Not Programmed; DTC U0300-57: Internal Control Module Software Incompatibility Invalid / Incompatible Software Component [01/2023 - ]: Description
- The forward recognition camera receives vehicle information (Conv/HV/EV) and vehicle information (transmission type) from the ECM via the CAN communication line.
- When the forward recognition camera is unable to determine the vehicle information (Conv/HV/EV) and vehicle information (transmission type) from the vehicle information (Conv/HV/EV) and vehicle information (transmission type) sent from the ECM, the forward recognition camera outputs U0300-51.
- When the vehicle information (Conv/HV/EV) and vehicle information (transmission type) sent from the ECM does not match the vehicle information stored by the forward recognition camera, the forward recognition camera outputs U0300-57.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| U0300-51 | Internal Control Module Software Incompatibility Not Programmed | Once 3 seconds elapse after turning the engine switch on (IG), the system is unable to determine the vehicle information (Conv/HV/EV) and vehicle information (transmission type) sent from the ECM and vehicle information (Conv/HV/EV) and vehicle information (transmission type) sent from the forward recognition camera for approximately 3 seconds or more |
|
| U0300-57 | Internal Control Module Software Incompatibility Invalid / Incompatible Software Component | Once 3 seconds elapse after turning the engine switch on (IG), the vehicle information (Conv/HV/EV) and vehicle information (transmission type) sent from the ECM does not match the vehicle information stored by the forward recognition camera for approximately 1 second or more |
|