DTC P062F-44: Internal Control Module EEPROM Data Memory Failure [10/2024 - ]: Procedure

Pre-procedure1

• None

• Clear the DTCs.

  Powertrain > Engine > Clear DTCs 

  Result

  Proceed to
  NEXT

Post-procedure1

• Turn the ignition switch off.

Result: 

NEXT 

See step  2

Pre-procedure1

• Disconnect the cable from the negative (-) auxiliary battery terminal and wait for 1 minute.
• Connect the cable to the negative (-) auxiliary battery terminal.
• Put the engine in Inspection Mode (for measuring Exhaust Gas).

  Powertrain > Hybrid Control > Utility 

  Tester Display
  Inspection Mode

• Start the engine and wait 30 seconds or more.

• Read the DTCs.

  Powertrain > Engine > Trouble Codes 

  Result

  Result	Proceed to
  DTCs are not output	A
  P062F-44 is output	B

Post-procedure1

• None

Result: 

A 

CHECK FOR INTERMITTENT PROBLEMS. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2022 - ] 

Result: 

B 

REPLACE ECM. Refer to  REMOVAL [10/2022 - ]