DTC P0606-09: Control Module Processor (Brake Override System Output Signal) Component Failure [11/2021 - ]: Procedure

1. Wait 1 second or more.
2. Read the DTCs.

   Powertrain > Engine > Trouble Codes 

   Result

   Result	Proceed to
   DTC P0606-09 is output	A
   DTC P0606-09 and other DTCs are output	B

Result: 

A 

REPLACE ECM. Refer to  REMOVAL [11/2021 - ] 

Result: 

B 

See step  2

HINT: 

After the inspection, perform the following procedure.

Result

Result: 

NEXT 

See step  3

1. Clear the DTCs.

   Powertrain > Engine > Clear DTCs 

2. Turn the ignition switch off and wait for at least 30 seconds.

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  4

1. Drive the vehicle in accordance with the driving pattern described in Confirmation Driving Pattern.
2. Read the DTCs.

   Powertrain > Engine > Trouble Codes 

   Result

   Result	Proceed to
   DTCs are not output	A
   DTC P0606-09 is output	B

Result: 

A 

END 

Result: 

B 

REPLACE ECM. Refer to  REMOVAL [11/2021 - ]