5.0L Gt
WARNING: This page is about a different car, the 1988 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL ALIGNMENT SPECIFICATIONS (5.0L GT)
| Application | Specification | |||
|---|---|---|---|---|
| Camber in Degrees | ||||
| Fraction | 3/64 +/- 3/4 | |||
| Decimal | 0.15 +/- 0.75 | |||
| Caster in Degrees | ||||
| Fraction | 1 11/32 +/- 24/32 | |||
| Decimal | 1.35 +/- 0.75 | |||
| Toe-In in Inches | ||||
| Fraction | 3/16 +/- 2/16 | |||
| Decimal | 0.188 +/- 0.125 | |||
| Toe-In in Degrees | ||||
| Fraction | 3/8 +/- 2/8 | |||
| Decimal | 0.375 +/- 0.250 | |||
| Toe-Out on Turns | ||||
| Inner | 20° | |||
| Outer | 19.84° | |||
| Steering Axis Inclination (SAI) | (1) | |||
|
||||