Driver's Seat Control Switch (With Memory)
Remove driver's seat control switch. Using an ohmmeter, check for continuity between indicated switch terminals with switch in appropriate position. See DRIVER'S SEAT CONTROL SWITCH RESISTANCE (WITH MEMORY) table. See Fig 1 . Replace driver's seat control switch if it does not test as specified.
DRIVER'S SEAT CONTROL SWITCH RESISTANCE (WITH MEMORY)
| Switch Position | Continuity Between Terminals No. |
|---|---|
| Front Up | 2 & 10 |
| Front Down | 3 & 10 |
| Rear Up | 10 & 12 |
| Rear Down | 10 & 11 |
| Seat FWD | 9 & 10 |
| Seat RWD | 1 & 10 |
| Recline FWD | 10 & 13 |
| Recline RWD | 10 & 14 |
| Memory Set | 5 & 10 |
| Memory "1" | 6 & 10 |
| Memory "2" | 7 & 10 |