Removal and Installation

WARNING: This page is about a different car, the 2004 Lincoln Navigator and 2004 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

Remove the parking brake shoes. For additional information, refer to PARKING BRAKE & ACTUATION .
Disconnect the wheel speed sensor wire from the retaining clips.

Fig 1: Disconnecting Wheel Speed Sensor Wire From Retaining Clips
Courtesy of FORD MOTOR CO.
Remove the bolt and remove the rear wheel speed sensor.

Fig 2: Removing Bolt And Rear Wheel Speed Sensor
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.