Pinpoint Test Pc: Data Link Diagnostics Test
WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- PC1 RUN THE DIAGNOSTIC TOOL DATA LINK TEST
- Key in ON position.
- Enter the following diagnostic mode on the diagnostic tool: Diagnostic Tool Data Link Test.
- Does the diagnostic tool indicate system passed?
- Yes : Test passed. RETURN to the Symptom Chart for the module in question.
- No : If ISO 9141 communications network circuit faults; all electronic control units no response/not equipped, GO to PINPOINT TEST G .
If controller area network (CAN) circuit faults; all electronic control units no response/not equipped, GO to PINPOINT TEST F .
If no response from the diagnostic tool, GO to PINPOINT TEST H .
If only one module does not communicate with the diagnostic tool, GO to SYMPTOM CHART .