LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2006 >> Navigator 4WD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Removal And Installation >> Seat Control Switch - Third Row >> Removal and Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal and Installation

    NOTE: There are 2 different left third row seat switches. The early build and late build switches are keyed differently. Make sure the correct switch is being installed.
  1. Partially remove the RH quarter trim panel for access to the third row power seat switch(es). For additional information, refer to REMOVAL AND INSTALLATION .
  2. Remove the one-way push nuts on the back side of the power seat switch bezel.
  3. Disconnect the RH and LH third row seat control switch electrical connectors.
  4. Release the 4 locking tabs (2 shown) on the affected switch, and remove the switch.
    Fig 1: Removing Locking Tab Switch
    G04630791Courtesy of FORD MOTOR CO.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals