LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2007 >> MKX AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 932 (Cruise Control System) >> Diagnostic Tests >> Speed Control >> Pinpoint Tests >> Pinpoint Test E: Flash Code 3 - Speed Control Deactivator Switch Circuit Failure >> Normal Operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Normal Operation

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

The speed control deactivator switch receives voltage through circuit CBP26 (BU/WH). When the brake pedal is not applied, voltage is sent to the speed control actuator, from the speed control deactivator switch, through circuit CES09 (VT/OG). When the brake pedal is applied firmly, the speed control deactivator switch opens, removing the voltage signal from the speed control actuator and disabling the speed control.

Possible Causes

scientia non olet · About LEMON Manuals