Powertrain Control Module (PCM): Installation
- If necessary, install the PCM bracket and the bolts.
- Tighten to 10 Nm (89 lb-in).
- Install the PCM and the bolts.
- Tighten to 7 Nm (62 lb-in).
- Connect the PCM electrical connectors.
- Restore the module configuration. Carry out the module configuration restore steps of the Programmable Module Installation procedure. For additional information, refer to MODULE CONFIGURATION article.
- Reprogram the passive anti-theft system (PATS). Carry out the Key Programming Using Two Programmed Keys procedure. For additional information, refer to ANTI-THEFT article.