LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2009 >> MKS FWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Handles, Locks, Latches & Entry Systems >> General Procedures >> Auto lock and Auto-Unlock Programming >> Programming the Auto-Unlock Feature Using the Instrument Panel Cluster (IPC) Message Center
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Programming the Auto-Unlock Feature Using the Instrument Panel Cluster (IPC) Message Center

NOTE: The auto-unlock feature can be activated or deactivated independently of the auto lock feature.
NOTE: The auto-unlock feature can also be configured on or off with the scan tool. For additional information on module configuration, refer to MODULE CONFIGURATION .
  1. Press the SETUP button on the message center switch until AUTO UNLOCK <ON> OFF is displayed.
  2. Press the RESET button to select ON or OFF. If auto-unlock is enabled, the message center will have brackets around the <ON> display. If auto-unlock is disabled, the message center will have brackets around the <OFF> display.
scientia non olet · About LEMON Manuals