LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2009 >> MKX FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 377 (Module Communications Network System) >> Diagnosis And Testing >> Communications Network >> Pinpoint Test D: The Four-Wheel Drive (4WD) Control Module Does Not Respond To The Diagnostic Tool >> Normal Operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Normal Operation

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

The 4WD control module communicates with the diagnostic tool through the high speed controller area network (CAN), circuits 1908 (WH) and 1909 (BK). If one of the bus wires becomes shorted to ground or voltage, communication can continue at a reduced level. Check circuits 1908 (WH) and 1909 (BK) between the 4WD control module C3253 and the data link connector (DLC) C251. Total resistance values must not be more than 5 ohms. If the resistance is more than 5 ohms there is an open in one of the high speed CAN circuits, damage to the DLC C251, damage to the 4WD control module C3253, or a problem in an in-line connector.