LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2010 >> MKS Base, AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft System - Passive Anti-Theft System (Pats) >> General Procedures >> Key Programming Switch State Control - Intelligent Access (IA) >> Special Tool(s)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Special Tool(s)

SPECIAL TOOL REFERENCE

G06064936Courtesy of FORD MOTOR CO.
 Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool
NOTE: The spare key programming switch is a programmable switch which provides the capability to enable/disable the normal customer spare key programming procedure detailed in the Owner's Literature. It must read ENABLE if more than 2 Intelligent Access (IA) keys need to be programmed into the Remote Function Actuator (RFA) module using the KEY PROGRAMMING USING TWO PROGRAMMED KEYS - Intelligent Access (IA)  procedure. This programmable switch is provided as a convenience for rental company fleets or other fleet purchasers who may not want the spare key programming procedure available to the vehicle driver.
NOTE: The spare key programming switch state can be viewed with the RFA  module PID Spare_Key_St.
NOTE: If the Spare_Key_St PID reads ENABLE, up to 4 IA  keys total can be programmed into the RFA  module using KEY PROGRAMMING USING TWO PROGRAMMED KEYS - Intelligent Access (IA) . If the Spare_Key_St PID reads DISABLE, the Key Programming Using Two Programmed Keys - Intelligent Access (IA) procedure cannot function. This switch is set to ENABLE when the vehicle is built. This PID does not affect the Key Programming Using Diagnostic Equipment - Intelligent Access (IA) procedure.
  1. From the scan tool, enter TOOLBOX. Select BODY - SECURITY - PATS  Functions and follow the Integrated Diagnostic System (IDS) on-screen instructions to ENTER SECURITY ACCESS. For additional information, refer to ANTI-THEFT SECURITY ACCESS - INTELLIGENT ACCESS (IA) .
    2. NOTE: The default setting of the key programming switch on delivery of all new vehicles is ENABLE, when viewing the RFA  module PID Spare_Key_St.
  2. From the scan tool menu select: "Customer Spare Key Programming Enable" (or "Customer Spare Key Programming Disable") and follow the on-screen instructions.
    • "Customer Spare Key Programming Enable" - the spare key programming procedure is accessible.
    • "Customer Spare Key Programming Disable" - the spare key programming procedure is not accessible.
scientia non olet · About LEMON Manuals