Connecting Rod Large End Bore

WARNING: This page is about a different car, the 2011 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Refer to the appropriate ENGINE MECHANICAL - 3.5L article or ENGINE MECHANICAL - 3.5L GTDI article for the specification.

Tighten the bolts to specification, then measure the bore in 2 directions. The difference is the connecting rod bore out-of-round. Verify the out-of-round is within specification.

Fig 1: Identifying Connecting Rod Large End Bore Measuring Directions
Courtesy of FORD MOTOR CO.